Donner patch cables

Donner patch cables DEFAULT

First of all, let’s be clear: By “patch cables,” we mean those short cables you use to connect all the guitar pedals on your board together. To choose the best patch cables for your situation, you have to consider not just sound quality, but price, the economy of space, and reliability. In this review, we’ll discuss all these topics and compare ten of the leading patch cables you can buy. Then we’ll make some recommendations based on your requirements and preferences.

But first, let’s get familiar with the details of patch cable construction.

Basics Of Patch Cable Design

The audio cable industry is rife with dubious claims, myths, and outright hokum. There are indeed certain characteristics that make a good audio patch cable. Unfortunately, there are others that don’t make any difference except to raise the price. Separating fact from fiction can be daunting.

Let’s examine this more closely…

What Makes A Patch Cable?

A guitar patch cable connects the output of one pedal to the input of the next. In order to build a compact and uncluttered pedal board, these cables are usually quite short. At each end, they usually have right-angle 1/4-inch plugs to save space. At the point where the cable connects to the jack, some kind of strain relief is generally provided.

In the center of the cable is stranded copper wire, which is really several very thin wires twisted into a spiral. This conductor is encased in a thick layer plastic (PVC) insulation and connected to the “hot” tip of the plugs at each end.

patch cables reviews

Why isn’t a solid wire used?

Solid wire might conduct electricity a little better, but would be so stiff that it would break if it were bent or twisted very much. Stranded wire is much more flexible.

The American Wire Gauge (AWG) standard is the US measurement of wire thickness. Smaller numbers represent larger wire, and a difference of three gauges represents a doubling in size. So AWG 21 wire is twice as thick as AWG 24.

Shielding

Audio cables are subject to “handling noise” and microphonics. It’s an electrostatic effect caused by friction between different internal materials rubbing together. It’s very important to minimize this noise in a guitar cable, less so for a stationary patch cable. Better-quality cables have a way to mitigate this noise, usually with a conductive shield surrounding the core insulation.

Outside this layer is the ground shield. It catches electromagnetic radiation, in particular 50-60 Hz hum from power line wires and transformers, and routes it to ground. Usually, the ground shield is another layer of copper wire strands that spiral in the opposite direction from the center conductor.

On more expensive cables, the strands are braided. This shield connects to the ground “sleeve” of the plugs. Sometimes, a thin layer of metalized polyester foil is placed under the braided shield to provide even better hum rejection.

All of this is wrapped with a tough outer layer of PVC insulation. In a cable with molded plugs, the insulation is one continuous surface, getting wide to encase the plugs.

Finally, some cables have an outer layer of tough woven fabric. It’s there to protect the cable from getting overly stretched or deformed.

What’s Important To Look For In The Best Patch Cables?

A thicker conductor has less electrical resistance (it’s more conductive). Less resistance equals a stronger signal, but not nearly as much as you might think. One foot of relatively thin AWG 24 wire has a negligible resistance of 0.025 ohms per foot, which is negligible except for extremely long cables, or for speaker wires. However, a thicker conductor will last longer.

Capacitance

A cable’s signal and ground leads work together to form a small capacitor. The more capacitance per foot, the more the high end will be rolled off. On a large pedalboard, ten pedals connected with 12-inch patch cables is equal to one 9-foot cable.

Capacitance in each cable adds up, so using low-capacitance wire for patch cables is important. Unfortunately, cable manufacturers often don’t publish this in their specifications unless it’s extra-low capacitance and becomes a selling point.

Shielding

Good shielding is necessary to keep hum from getting into the signal. With spiral shielding, the strands can spread apart over time from bending, until gaps appear where hum can leak in.

Braided cable is more robust because the strands stay bound together and form a tighter shield. It’s more expensive to manufacture and harder to work with, so braided-shield cables are often significantly more expensive. Even better shielding results from adding a solid foil shield under the braid.

A foil shield provides 100 percent coverage, except when it tears. Spiral and braided shields inevitably have small spaces between the individual wires. So a braided shield alone provides about 90 percent coverage. A good spiral shield is usually 90 – 95% effective. It can deteriorate after a lot of flexing, although for a pedal board patch cable, that could take a long time.

Quality Plugs

The quality of the plugs are what can make or break a good cable. If these are separate metal connectors, the conductor and shield must be solidly connected, the casing should contact the outer insulation to help hold it in place, and some kind of strain relief should be added where the cable enters the plug casing. If plugs are molded into the outside insulation layer, the strain relief is built into the covering.

patch cable

Most plugs are nickel-plated steel. Over time, the surface of the jacks can become oxidized, the shiny silver color turning to very dull gray. Oxidation creates electrical resistance, causing signal loss. Even worse, it can behave like a diode, which will cause unpleasant distortion. To prevent this, cables need to be removed and the plugs cleaned from time to time. More expensive cables have gold-plated plugs that don’t oxidize.

A major consideration when selecting patch cables for pedals is the height of the plug casing. How far does it stick out from the surface of the pedal? Flatter plugs let you place your pedals closer together and save valuable space.

What’s Not Important?

One of the biggest myths about cables is the superior conductivity of “oxygen-free copper” (OFC). This is copper that’s been refined to remove almost all the oxygen from it. However, even the most expensive OFC is only about 1 percent more conductive, a trivial difference. Nor does OFC have any measurable effect on cable capacitance or hum rejection.

A woven outer jacket is great for protecting a guitar cord that gets flexed, stretched, and stepped on frequently. That level of abuse is uncommon for a patch cable mounted on a pedal board. So it doesn’t add much value.

It’s also important to take reviews and comments by other guitarists with a grain of salt. If someone replaces an old patch cable, that has oxidized plugs and possibly a broken shield, with a shiny new one, of course, it will sound better!

Top 10 Best Patch Cables Of 2021 Reviews

patch cables guide


Donner 6 Inch Patch Black 6-Pack Guitar Effect Pedal Cables

Donner classic patch cables have a hefty conductor of AWG 21 stranded copper wire (oxygen-free, for what it’s worth), and an outer PVC jacket. The manufacturer claims “ultra-low capacitance” without being specific. They don’t include a static shield.

The molded right-angle plugs include adequate strain relief. The casing has a height of 0.9 inches, so pedals with input and output jack on the sides need to be nearly 2 inches apart. The cable’s outer diameter is .315 inches (8mm).

Donner patch cables are available in 6-inch or 12-inch lengths, in packs of three or six.

Pros

  • AWG 21 signal wire.
  • Excellent value.

Cons

  • Large plugs not convenient in tight spaces.

 D’Addario PW-CGTP-305 Classic Series Patch Cable

D’Addario Classic Series (formerly Planet Waves) patch cables look very well-made. The manufacturer claims they’re low capacitance because the copper is “ultra-pure oxygen-free,” a dubious claim. These are six inches long, though they are also available in 1-foot and 3-foot lengths. They have dense spiral shielding and are treated to reduce handling noise.

These cables have molded plugs with substantial strain relief. The casing is nearly one inch, so they’re not ideal when space is very tight.

Pros

  • Sturdy construction.
  • Good value.

Cons

  • Molded plugs are a little bulky.

 Other Patch Cable, Black, 6 Inch (3PDCP06)

Despite the listing description, these 6-inch cables come from famous guitar pedal maker MXR. They feature oxygen-free copper conductors and spiral shield with 90 percent coverage and a PVC outer jacket.

Flat plugs make it possible to position pedals closer together. Also, they’re soldered on, not molded, so if a connection is broken (the most common cable fault), you can repair it. They’re wider than normal, so you might have to reposition a pedal up or down slightly.

How do they sound?

The cables are quiet, so hum isn’t an issue. A few users have claimed to hear slight tone loss when using several of them, but such reports are always subjective. On the plus side, they come with a limited lifetime warranty against manufacturing defects.

Pros

  • Flat plugs save space.
  • 6-inch length means less tone loss or added noise.
  • Lifetime warranty.

Cons

  • More expensive than some models.
  • 90% spiral shielding is just average.

 Neewer 3 Pack 1 Feet Guitar Patch Cable

This product contains three 1-foot Neewer patch cables. They have soldered-on right angle metal plugs, and an unusually long PVC strain relief to better protect against a broken connection. The plugs are nickel-plated, with the shell extending out from the jack about 3/4 inches.

The manufacturer states that the cable is “ultra low capacitance,” This is good, but it doesn’t reduce 60-hertz hum or crackle noise as they claim. Handling noise is reduced by impregnating the insulation with carbon.

The PVC-insulated cable is enclosed in a durable black and white woven jacket. This can help protect it from being damaged by too much stress. The cables are also available individually or in packs of six.

Pros

  • Woven outer jacket.
  • Strong strain relief.

Cons

  • Metal plugs take up space.

 Fender Professional 6″ Cable – 2 Pack

Fender Professional 6-inch patch cables feature metal plugs with a fairly flat profile, so your pedals can be placed closer together. They include a very strong PVC strain relief that extends about two inches and covers most of the plug. This makes them stiff, nearly impossible to bend close to the plugs.

The signal conductor is AWG 21 stranded wire. The shield is also stranded, providing 95 percent coverage. Cables have an outer diameter of 8mm (.315 inches). The package includes two cables, and they’re also available in lengths of one to 25 feet.

Pros

  • AWG 21 conductor.
  • Low-profile metal connectors.
  • Excellent strain relief.

Cons

  • More expensive than some other models.

 Ernie Ball Flat Ribbon Patch Cable, 6 Inch (P06226)

Ernie Ball patch cables are available in lengths of 3, 6, 12 and 24 inches. The manufacturer brags that the copper connectors are 99.95 percent oxygen free, which makes them more resistant to oxidation (it doesn’t).

More significant is the dual-shielded design. A stranded copper outer hum shield sits over an electrostatic shield to reduce handling and noise and microphonics.

The nickel-plated metal plugs are perfect for fitting on a pedal board, very flat, and with a small base. They’re soldered rather than molded, so you can repair any that might fail. However, they don’t have much in the way of strain relief.

Pros

  • Dual shielding.
  • Plugs are the optimal size for a pedalboard.

 EBS Cables PCF-10 Flat Patch Cable

EBS is a Swedish company that makes patch cables with an innovative design. The cable is flat (rectangular) rather than round, 7 x 3mm (.276 x .118 inches), and 16cm (about 6.3 inches) long. So it’s very easy to flex them into position on a pedal board.

Inside, the main signal conductor is 20 strands of 0.12mm wire, which is roughly the same as AWG 31 wire. This is surrounded by polyethylene and a conductive PVC electrostatic shield. On the outside is a spiral ground shield comprising 38 strands of 0.12mm wire.

No loss of signal…

The cable has a rated resistance of less than 0.01 ohms per decimeter (about 4 inches), and a rated capacitance of less than 10 picofarads. This is about average for high-quality audio cable. Signal fidelity loss won’t be an issue.

The molded plugs are flat and nickel-plated. There’s no strain relief, but the rectangular design and thick package minimizes the chance of damage.

How do they sound?

Well, EBS patch cables were chosen for the Guinness World Record Largest Pedal Board (at Sweetwater Sound in 2019), with 500 feet of cables connecting 319 pedals.

Pros

  • Innovative flat cable shape.
  • Compact plugs.
  • Quiet.

 Hosa CPE-106 Right Angle to Right Angle Guitar Patch Cable

Hosa Technology is an American company whose cables are a top choice among musicians and audio professionals. The CPE-106 patch cable lives up to that reputation. It’s six inches long, but it’s also available in 12 and 18-inch lengths. You can also buy a 6-pack of 6-inch cables.

The conductor is AWG 24 stranded wire. And as with most of the cables reviewed, the CPE-118 has a spiral oxygen-free copper shield.

The all-metal nickel-plated connectors have a low profile, but they’re bigger than so-called “flat” plugs. They have a long housing and an even longer stiff PVC strain relief that provides maximum protection against kinking.

Pros

  • Very strong connectors.
  • Large strain relief.

Cons

  • More expensive than many other models.

 Mogami Gold Instrument-0.5RR Guitar Pedal Effects Instrument Cable

Mogami Gold Instrument patch cables are designed for very low noise or signal loss, where price is no object. This cable is 6 inches, the shortest available. Other sizes available are 10 and 18 inches, and 2, 3, 6, 10, and 25 feet.

This cable is built to last a lifetime. The conductor is AWG 20 stranded OFC. Surrounding the core is a conductive polymer sub-shield. The spiral ground shield is labeled “ultra high-density (UHD)” because of the larger number of wires strands used. And the outer jacket is carbon-infused PVC to prevent handling noise.

For the 6-inch cable, the conductor resistance is only 0.005 ohms, and total cable capacitance is a mere 20 picofarads.

Rugged for lifelong use…

Heavy-duty molded plugs are gold plated to prevent oxidation. The extended plug casing, plus stiff PVC sleeves, provide excellent strain relief. The plugs aren’t the flat style, so they do stick out a bit.

These cables feature Mogami’s lifetime “no excuses” warranty.

Pros

  • Heavy-duty plugs.
  • Very low-capacitance cable.
  • Lifetime warranty.

Cons

  • Significantly more expensive than other brands.

And for those of you who like to do it all yourself

 D’Addario DIY Solderless Pedalboard Kit

The D’Addario Solderless Pedalboard Kit offers a different solution for wiring up your pedal board, with a couple of key advantages. First, you can make the cables exactly as long as you need and no longer. This keeps both noise and clutter to a minimum.

Second, the kit includes D’Addario’s American Stage cable, with a braided shield. This provides superior shielding that won’t deteriorate over time. You get ten plugs and 10 feet of cable to work with. If you buy two kits, you can make nine 13-inch patch cables and a 10-foot cable to run from the last pedal to your amp.

Everything included…

Plugs are plated with 24-carat gold, so they’ll never oxidize. These are solderless connectors, and a screwdriver and mini cable cutter are included, so you don’t need any other tools.

This method might sound less reliable than soldering, but the connections are, in fact, very strong, as long as you can use the tools properly. Components are covered by a limited lifetime warranty.

Pros

  • Customized cable lengths.
  • Braided shield.
  • Easy to put together with included tools.

Cons

  • Poor results from sloppy work.
  • Relatively expensive.

Need Some Pedals To Connect Together?

Having the best quality patch cables will make you a very happy guitarist, but their not much use without some great pedals to run in-between them. So, check out our reviews of the Best Uni Vibe Pedal, the Best Digital Delay Pedals, the Best Compressor Pedal, the Best Flanger Pedal, and the Best Analog Delay Pedals currently available.

You may also enjoy our reviews of the Best Guitar Pedalboard to arrange everything on.

So, What Are The Best Patch Cables?

We’re going to cheat a little and give more than one answer. Do you want the highest-quality patch cables, regardless of price? Or do you need to find the best alternative on a tight budget? Or somewhere in between?

Best Patch Cable At Any Cost

Mogami Gold Instrument cables are hard to beat. They’re made with top-quality components and have a lifetime warranty. If your budget can afford them, you’ll almost certainly never have to worry about cable problems.

Best Patch Cable For The Working Musician

EBS PCF-10 flat patch cables have an innovative design that simplifies pedal board cabling. The specs are outstanding. Although they’re a bit pricey, you’ll be grateful later for the money well-spent.

Best Value Patch Cable

It’s hard to beat Donner patch cables for getting your pedalboard wired up without spending a small fortune. They work, they’re quiet, and even if you’re unlucky enough to have one failure, these are still your least expensive option by far, so very easy and cost-effective to replace.

Share:

Sours: https://oldtimemusic.com/best-patch-cables/

Length - Though most patch cables come with extensions such that length is not an issue, there are a few models that are purposefully kept short in order to minimize tangling and coiling issues. If you need your patch cable to have a far reach, double check the length in the specs.

Patch Cable Buyers Guide

So that was the ten patch cables of the day, did you find any favorites?

Even though patch cables might not be the most fun things to shop for, it’s essential to choose the right ones - here are a few things to consider when buying patch cables. It can really affect your tone, and it’s an investment worth making. After all, you might end up using them for many years, and if you think about that, not even the expensive ones are very expensive in the long run. Hopefully, you’ve found the right instrument patch cables for you on our list!

But you might still be wondering what you need to think about when you choose instrument patch cables, and how you can know which ones are best. Take a look at our Buyer’s Guide, and we’ll answer the most frequently asked questions about patch cables!

What to look for in a Guitar Patch Cable?

When you buy patch cables, there are a few good things to keep in mind. First, you need to consider how much you can afford to spend, the more expensive, and the better the effects pedal cables. We’re sorry, but it’s true!

It’s good to know that there are two different kinds of metal plugs, right angle and straight. Right-angled plugs will allow your effect pedals to be put closer together, which will leave you more empty space on the pedal board to fill with other pedals.

It’s good to choose as short pedal couplers as possible. This goes for all effects pedal cables, as the length affects the sound quality. The longer the total amount of cable, the worse the sound quality you will get. Another aspect of this is that it doesn’t look very good if you have a lot of long cables between your pedals.

What is a Patch Cable?

A patch cable is a short cable that connects your electrical guitar pedals. It’s not harder than that, really!

Best Patch Cable for Pedalboard?

If you want to know our opinion, we would without a doubt name number 2 on our list, Mogami Gold patch cable, as the best one. The Mogami Gold patch cable extremely high quality and comes with a lifetime warranty, which is really rare.

Best Patch Cables for Bass?

Mogami Gold, that we think are the best ones for guitar, also works very well for bass guitar. There are no special patch cables for bass guitar, so any from this list works too.

Expert tip

Use as short cables as possible. You want the total length of all the quality cables you’re using to be short for the longer they are, the more your tone will be affected.

Did you know?

Which patch cable you use is a more important decision than you might think, since cheap ones will affect the guitar tone, as mentioned in this study.

Sours: https://musiccritic.com/equipment/cables/best-patch-cables/
  1. Adobe dimension mockup
  2. Attic gaming setup
  3. Wrist pedometer amazon
  4. Lkq inventory charleston
  5. Tableau 3d chart
4.7 out of 5 stars

Are you one of those creative musicians who like to make their own music? Look no ahead, the Donner series patch cables are what you need. The Donner patch effect pedal cables are designed to interconnect electric guitar’s pedal effects.

The Donner patch is an extremely affordable and convenient cable in the market. This patch cable is also used for audio signal transmission of other equipment, including microphones, amplifiers, etc.

No matter whether you are a professional, beginner, or high-level player, this effect pedal cable is a must-have for all. The Donner patch black guitar effect pedal cables review will describe in-depth attributes of this cable. Take a look.

Hold on! Please find more top low cost guitar cable, including a complete buying guide from another review.

Highlights of Donner Patch Effect Pedal Cables

Donner patch cable comes with some standard features, let’s learn more about them.

Build-Quality

Like most high-quality guitar cables, the Donner patch effect pedal cables feature solid build quality. It utilizes an oxygen-free copper wire conductor for ultra-pure and clear signal transparency.

Besides, its spiral shielding helps to eliminate almost all handling noise around. By removing all the noise, it ensures quiet operation. The jacket material is crafted with PVC to protect the signal from outside.

Sound Quality

Its ultra-pure copper conductor provides low capacitance. This extremely low capacitance also delivers pure tone just like you have created. However, the cable provides a better connection between equipment.

Thus, Donner patch cable only transmits a high-fidelity signal to the attached equipment. Most importantly, it’s unique In=Out technology ensures you get what you need only. You can connect more devices to make the best sound possible without any dispersions.

Length

The Donner patch effect pedal cables come with 6 feet or 15cm length for a secure fit. It is good enough to interconnect devices. The cherry on the cake is, there is no chance for signal getting distorted.

Compatibility and Value

One of the attractions of this cable is its two big core, molded TS ¼” audio plugs. These plugs are engineered with the In-Out technology for efficient signal transfer. The plugs make the cables compatible with pedalboards.

These right-angle plugs provide close spacing of pedal effects on pedalboards. With these single-molded strain relief plugs, the Donner patch offers added durability and reliability.

Moreover, Donner patch comes in 3 to 6 pieces pack that too at an extremely affordable price. Who wouldn’t want to get such a decent offer? Everyone, then why not you!

Who Should Buy This?

As mentioned earlier, the Donner patch effect pedal cables are best for transferring signals to different equipment. These effect pedal cables are suitable for use in home studios. These will help you to make masterpieces by combining several devices.

  • A great value pack
  • Too affordable
  • Solid build
  • Flexible and durable
  • Pure signal transparency
  • Quiet operation
  • Superior noise rejection
  • Great compatibility
  • Some may not like single-molded jack plugs

[amazon fields=”B077N2KJZX” value=”button”]

Bottom Line

No matter whether you buy Donner patch effect pedal cables, this cable is undoubtedly a great deal. It also got mostly positive reviews from the expert musicians. So, try this NOW!

Categories GuitarSours: https://musicalinstru.com/donner-patch-black-guitar-effect-pedal-cables-review/

9 best patch cables 2021: tidy up your ‘board with the best patch leads

If you've committed to building a pedalboard, the initial driver is likely to be a combination of organisation and portability. Having lots of random, mismatched guitar cables is stressful if something goes wrong mid-set. Not only are longer cables untidy and make it harder to move your ‘board, but they’re heavier too. When building a board, we’d recommend purchasing a brace of the best patch cables you can afford to give your organization (not to mention your confidence) a boost.

Off-the-shelf patch cables (also sometimes called pedal couplers) are excellent, with mechanical failure rates way lower than they used to be, even at the budget end of the market. You can also build your own patch cables to ensure you get the right sizes, and there are solderless patch cable kits from several companies. In this guide we’re going to look at the top patch cables you can buy right now.

Best patch cables: Guitar World's Choice

Based on both the low price, and the fact that they've been rock solid for us, we've got to recommend the Donner Pancake Cables. With six in a pack, there's enough to wire up a good chunk of your pedalboard, and they don't look ugly either. The only downside is that they're more difficult to come by in some locations depending on distribution. If you can't get the Donners, then the Planet Waves 3-pack is also excellent value, though a bit higher-profile at the jack end.

At the highest end, there's Mogami cables, but we don’t feel there's much benefit to cables that plush. A better compromise is something like the Ernie Ball Flat Angle Patch Cable or Fender Angled Jack Patch Cable, which are still premium, but not excessively so. In the case of the Ernie Ball, they also come in a pancake version, ideal for tighter pedalboards.

Best patch cables: Product guide

1. Planet Waves Patch Cable

The best patch cables for the stealth look

Price: $10/£13 | Length: 15cm | Number of cables in pack: 3

Solid build

Affordable option

No issues at this price

There's not a lot to say about this cable. Like Planet Waves' larger offerings, it's solidly built, and the stealth black aesthetic is to the point. They're shielded to reduce noise, and are made in the USA. 

This three-pack option is affordable enough that you could wire up a smaller pedalboard cheaply. All three cables in the pack are the same length, but Planet Waves also offer longer right-angle-to-right-angle patch cables up to a length of 3 feet.

They even offer a double-ended jack for the very tightest of spaces, but beware – we've found this kind of inline connector to be prone to breaking.

2. Donner Patch Cable

The best patch cables for the budget conscious player

Price: $19/£15 | Length: 15cm | Number of cables in pack: 6

Compact design

Solid build quality

Affordable and available in multi-packs

Not super widely available

Where you can get them, the Donner low-profile patch cables are one of the best value options on the market. They have a robust metal pancake jack, and a large pack size of six.

They're copper shielded, with oxygen-free copper for low noise. Donner claims that the polyethylene insulator they use is more heat resistant and durable than using PVC, but we can't recall ever having an issue with insulation sheath damage.

Six packs are available with lengths of either 15cm or 30cm, meaning that all but the longest cable runs should be covered.

For some reason, distribution and availability is spotty for these cables.

3. Ernie Ball Flat Angle Patch Cable

The loudest patch cables around

Price: $16/£14 | Length: 15cm | Number of cables in pack: 3

Super cool looks

Pancake low-profile jacks are ace

Slightly more expensive than the norm

The super-bright color options of the Ernie Ball Flat Angle patch cables may not be for everybody, but we love them. Should you want something less loud, there are white and black options, as well as different jack configurations.

We've singled out the pancake option here because, in our experience, space is always at a premium. Like most quality cables, these are shielded, and have a tough PVC outer shell for durability. While they're not the cheapest, for a three-pack they're hardly extortionate.

Ernie Ball offers both 15cm and 30cm options as three-packs, so you can mix and match between those. However, this is only if you opt for regular right-angle jacks instead of pancakes. 

4. Mogami Gold Instrument PRR Pancake Right Angle Pedal Cable

For when you have a bigger budget

Price: $29/£24 | Length: 15cm | Number of cables in pack: 1

This is the premium option

Quality performance

There are better things to spend money on

We've always spent our money on high bang-for-buck utilities, or things that make fun noises. As a result, spending this much cash on a single cable has never been on the cards for us.

That said, we do know people who swear by these, and for the price they do at least come with a bombproof reputation.

The cables themselves feature an oxygen-free copper core for low noise, which is pretty standard, as well as a spiral shield. The main deviation from the norm is that the jacket is 'carbon-impregnated' to eliminate handling noise and improve durability.

For about the same price, there's also a ten-inch and eighteen-inch length option.

5. Fender Angled Jack Patch Cable

A great option if you’re looking for a vintage vibe

Price: $9/£4 | Length: 15cm | Number of cables in pack: 1

Stylish, vintage looks

High-quality feel and build

Pricier than some

We love the look of the Fender Custom Shop cables, and the tweed option is the coolest patch cable on the market, hands down. On top of the standard PVC cable sheath, there's a paracord fabric outer, available in a classic straw tweed and black tweed finish. 

They look slick, they're reliable, and are guaranteed for their lifetime by Fender. Whether you are likely to ever use that guarantee is another story.

The main drawback is that they are expensive compared to the other options. You can get them in a two-pack but there's usually no discount for doing so.

Fender also makes a 30cm right-angled patch cable, but it's only available in a plain finish, and not with the tweed outer.

6. Boss Solderless cable kit BCK-12

The best patch cables for the perfectionist

Price: $89/£78 | Length: Variable | Number of cables in pack: 6

Enables custom wiring for your pedalboard

Solderless

Costs more than a pack of pre-made cables

An affordable option in the custom cabling stakes, this widely available Boss set has the benefit of being solderless. There's a price to pay for the flexibility of making your own cables though. Not only the ticket price, but in debugging time if something does go wrong with your custom creations.

Luckily, these are pretty foolproof as custom cables go. If that's the sort of thing that's likely to play on your mind though, then it may not worth the hassle.

The BCK-24 is only a little bit more expensive in some stores, and is double the size, with 24 connectors, and 24ft of cable – one for guitarists taking on a bigger pedalboard.

7. Hosa Flat Patch Cable

Compact patch cables for a tight 'board

Price: $28/£16 | Length: 15cm | Number of cables in pack: 6

Low-profile

Good value

Not much cheaper than Ernie Ball

The 'go-to' pancake, or low-profile patch cable, the Hosa is a workhorse. It's cheap, widely available, and rock solid.

Although they sit at the budget end of the market, they're low-noise, with oxygen-free copper conductors and spiral shielding. This will keep EMI and RFI interference under control.

Hosa makes many different cables and lengths. Should you want 30 or 45cm long patch cables, Hosa makes them with both standard right-angle and low-profile connectors.

The only drawback to the Hosa product line is that some more exciting looking patch cables, like the louder Ernie Ball offerings, are now available at a similar price.

8. Rockboard Flat Patch Cable

For that one annoying cable run

Price: $5/£7 | Length: 20cm | Number of cables in pack: 1

Very compact design

Good variety of sizes on offer

None

Every pedalboard has one or two annoying cable runs that need an odd length. Usually, this is from one 'row' of a stepped board to another, or due to a weird-sized pedal like a wah, whammy or multi-effect.

Rockboard have a wide range of patch cable lengths available, with moulded ends that are even lower-profile than a pancake cable.

The cables have low resistance and capacitance as well as full copper shielding. They make short TRS patch cables, which will help with expression pedals that take TRS. A small number of pedals also use TRS for stereo input or output.

9. D'Addario Pedal Board Cable Kit

For gaining that Instagram cred

Price: $79/£69 | Length: Variable | Number of cables in pack: 5

Jack ends very good for a kit offering

Custom length cables

Solderless

Price compared to off-the-shelf cables

Competing with Boss in the mass-market solderless kits territory is D'Addario. They've done something strange with this kit, beating their competitor on price, but offering an odd number of cables. Their assumption is either that most boards require more than five, or it's a sneaky marketing move.

The cable is a low-capacitance, shielded cable as you'd expect from a premium offering. The kit comes with a mini cable cutter and screwdriver, should you not have those tools available.

The main advantage of these over the Boss option is the semi-moulded right-angle jacks. It's splitting hairs a bit, but you might prefer that to the metal housing of the Boss jack ends.

Sours: https://www.guitarworld.com/features/best-patch-cables

Cables donner patch


*Pedal for scale. Not included*

The Donner patch cables are designed to interconnect electric guitar pedal effects. Right-angle plugs allow close spacing of pedal effects on pedalboards. The right angle plug design also makes 3 pack or 6 pack an ideal fit for assembling a pedalboard to your exact specifications. They feature ultra low capacitance which lends to a pure signal transparency. 
The Donner patch cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. With a single-molded strain relief plug these cables also provide added durability and reliability. A 90% spiral shielding also helps to eliminate virtually all handling noise. 
Specification: 
Length: 12 inch / 30cm 
Plug Diameter: 1/4-inch/ 6.35mm 
Shielded multiconductor cable 
Material quality: Oxygen-Free Copper Wire 
Jacket material: PVC 
Outer diameter: OD4.0*2(mm) 
The main purposes: Audio, musical instruments, engineering and various kinds of information transmission 
Products Certification: FCC, CE, CQGC 

Sours: https://reverb.com/item/18549260-donner-guitar-patch-cable-6-pack-30cm-1-4-inch-right-angle-pvc-for-instrument-standard-audio-connect
Donner Professional Pedal Cable

She diligently avoided him, and when she failed, she blushed and quickly lowered her eyes. Oh those women. September - December 1985 Revised: October 1990 the end of a narrow vagina, stretching even more, but not tearing her hymen. Playing the sculptor excited Vovka so much that, entering Gina only half of his penis, he finished for a long time.

Puffing and moaning, and filled her glorious hole with liquid sperm to the brim.

Now discussing:

Fuck me like the last whore. You are the last whore. I told her.



1007 1008 1009 1010 1011