Bryant vs ruud

Bryant vs ruud DEFAULT

I have recently requested a few quotes from HVAC supplier re the potential replacement of my existing 1993 Bryant 3.5 ton 13 SEER unit. I am only replacing my a/c since I have a 5-6 old Ruud Furnace 80+ Super quiet furnace. I had asked for quotes on both a replacement 13 Seer and a 16 Seer updgrade. It has come down to these two quotes...

1) Carrier 13 Seer 113ANW0042 $4697
Carrier 16 Seer 126BNA004200 $5267
Coil for both units CNPVP 4221 (other quotes included a different coil number 4824 but sales guy said no real difference in price or function??)
this quote includes a 5 year labor warranty with 4years of preventive maintenance inspections.

2) Ruud 13 Seer 3.5ton RR13AJN42A01 $3875
Ruud 16 Seer 4ton RR-16AJL48A01 $4700-- said there no such thing as a 3.5 16 Seer???

Coil for both RR-RCFL -HM 4824cc - should it be different for the 13 Seer.

Some background .We live in the DC area and my monthly electric bills for the house (ranch 1950 sq feet main floor with partially finished basement ) average $110 during the 3 hottest summer months.

My questions are based on my usage and the cost!1) is it worth it to move to a 16 seer over the 13? 2) There is obvious value in the 5year labor warranty --- is it worth the difference in price 3) Any other comments re the chocie of a Ruud vs Carrier? Jack


I am replacing my whole system and have received multiple quotes. The two best are Bryant and Rheem:
Both systems are priced at $9000 USD

Bryant #987MA60080V21 (78k BTU) fully modulating 97% efficient gas fired forced air furnace with an ECM blower motor
Bryant #186BNA036 single stage Evolution condensing unit with a 16.5 SEER
Bryant #CNPVP4324ALA insulated, cased evaporator coil.
Bryant #SYSTXBBUID01C Evolution control.
Honeywell external 4" filter rack
(Optional: Bryant Perfect Air Purifier #GAPAXXBB2025 for and additional $850.00)

Rheem #RGFG09ERS (90k BTU) modulating 95% gas furnace
rheem 14ajm36 single stage up to 16 seer
Rheem RCQD3621 coil
New modulating thermostat
(assumed similar air filter)
(Optional: Clean Effects Air Cleaner: $995)

On consumer reports, the Bryant rates 8% (fewer repairs) compared to Rheem at 10%, plus the Bryant efficiency is better for the furnace.

The Rheem installer told me he may "throw in" a new AprilAir powered humidifier worth $500 but I may be able to use my older model already in place so it is a wash.

Which system is better?
Are these good prices?
Are the add-on electrostatic air clearers worth the extra $$$ ?
The Evolution condensing unit on the Bryant is actually an upgrade compared to their legacy condensor. The only difference I can see is the noise is reduced - but it is worth extra $300?

  1. Love smile wallpaper
  2. Love psychology today
  3. Amazon boat supplies

Lennox vs Rheem vs Daiken vs Bryant vs Ruud vs Trane vs American Standard vs Day & Night vs American Standard Furnace Brands Comparison Download


There are manyparametersthat affect the price of a furnace. These include the furnace quality, furnace performance, furnace efficiency and furnace size. Because of this, when you are comparing prices, you should make sure that you are comparing units with similar features and capabilities. When you purchase a new furnace you are not only paying for the furnace itself but you also need to pay for the materials to install it as well as the labour involved to do the installation.

To help you get an idea about the range of prices you can expect for some of the common brands offurnace, we’ve used the following system. $ – Lowest Price, $$ – Moderate Price, $$$ – Higher Price, $$$$ – Top Price.

Here are 8 of the most common furnace manufacturers and their corresponding price range.

  • Lennox – $$$$
  • Rheem – $$
  • Daiken – $
  • Bryant – $
  • Ruud – $$
  • Trane – $$$
  • American Standard  – $$$
  • Day & Night – $




There are three different performance categories forfurnaces and each of the brands makes one or more models in each of the three categories.

Basic Performance:This category of furnace has single-stage gas valves and single-speed blowers which make louder as they go through their heating cycles. Their temperature fluctuates and you get some unheated air at the start and end of their cycles.

Better Performance:This second category of furnace is equipped with two-stage gas valves that have multi-speed and variable-speed blowers. The blowers usually run at a lower capacity which makes them quieter than the basic performance furnaces. They also give a better temperature balance.

Best Performance:The final category of furnace has variable-capacity gas valves, also known as modulating heat. They use variable-speed blowers and are the quietest of all three types of furnace. They are able to raise and lower the amount of heat they produce in small increments. They work much like a car that you have put on cruise control, thus giving your house a very constant heat.



Deciding on an air conditioning system for your home is a huge decision.

It combines two of any homeowner’s most anxiety-laden considerations: cost and quality-of-life. A new AC can be a huge investment. If that investment doesn’t leave you satisfied, it’s hard not to feel like you’re stuck with a huge bill and a bad choice. When you look at the cost and quality of AC systems, you can easily find the system that will bring you the best value.

In this article we’ll break down over a dozen different AC companies. I’ll also talk about what you should look for in your new AC system so you get the best-valued system for your home. So set your fears aside and let’s take an anxiety-free look at what these companies can provide for you.

What We Look for in a Brand

When considering investing in an AC system you’ll want to think of a few things specific to your home’s needs. But it’s also important to think of what brands can offer you that will make your life better. Every system is different, and every home’s needs are different. But what do we look for in a good AC company?

The first thing to consider is the longevity of your system. This is actually partly to do with who you contract to install the system. A great contractor will make sure your system is installed properly. A properly-installed system should run for 15 years or more with proper care. Don’t fall prey to lower bids from a contractor who may do less-than stellar work. You can think of this as the first investment into the long life of your new AC system.

There are some other qualities you’ll want to consider regardless of what company you choose. Of course, cost will be the first thing you look at, but cost and value do not always correlate to one another. Another important consideration is the energy efficiency of the system. This will determine your ongoing costs, environmental impact, and other factors.

The durability of the system is a good indicator of the system’s value. If other customers report replacing their system after only 5 or 10 years, look elsewhere! And if a company gets bad press for their customer service, they may not be reliable.

Other things to consider are what features will make your overall quality-of-life better. What companies offer those features? And don’t forget about things like the noise levels of your unit.

Many of these companies are creating similar, high-quality systems. This search will be about finding what works best for you. Which company can bring you the greatest efficiency, the most power, at the best price. When it comes to your needs, not all products are created equal!

Energy Efficiency

The efficiency of a machine is a good way of measuring two main factors on your home AC. First, how much power you’re going to be spending in the long-term. Second, what the environmental impact will be.

When looking at the efficiency of your desired system, you’ll want to look for SEER ratings. SEER stands for Seasonal Energy Efficiency Ratio. It’s measured by looking at the energy consumed vs. the amount of cool air put out by the machine. This means you’ll want to look for units with higher SEER ratings, since they’re putting out more cool air while using less energy. The typical spread on SEER ratings tends to be from 13 SEER (the Department of Energy minimum requirement) to just over 25 SEER.

High SEER ratings tend to mean a higher cost for the AC unit, but also can mean a higher quality. When you see a unit’s rating it’s best to compare the cost of a higher-SEER unit with the amount of money you’d actually be saving on your electric bill. There should be specific information about savings each year in the unit’s information.

Another important consideration with high-SEER systems is how often you cool your home. If you’re in a climate that is only warm for a short part of the year, like northern Maine, a higher efficiency system won’t get you a huge amount of savings. But if you’re in the southern states, that higher-efficiency system will be doing more work for you.

Reliability and Durability

Finding a trusted, reliable brand is going to be one of the most important parts of the AC search. But reliability and durability aren’t the same thing.

Durable brands are the ones that tend to break down less. They’re designed and go through rigorous testing and quality control. Obviously, you want a machine that’s going to run for as long as possible without breaking down.

When considering durability you’ll want to look at things like customer reviews. Those show the quality, longevity, and common problems with many systems. Also look for what professionals have to say about certain companies. Especially HVAC techs, since they have the most experience with “when things go wrong.”

HVAC condenser units should be kept clear of obstructions

Reliable brands do tend to turn out more durable products. But to me a reliable brand is actually defined by how they respond when something does go wrong. In my experience, a brand that has a good warranty or maintenance options will take me further mile-for-mile than a brand without those options, even if their unit happens to last a little longer. To me reliability is a hallmark of long-term care, while durability is a hallmark of excellent craftsmanship.

Finding a reliable brand can be a bit trickier. Reviews are again a good indication. See how a company responded to issues their customers brought up. Another good thing is to look for warranty options and maintenance plans. A more reliable company is going to honor their customers with a more extensive warranty.

Of course you want to find a brand that is both durable and reliable, and both of those things often go hand-in-hand. It can be tough to find the balance, but it’s worth the extra research to find a brand you know you can trust.


Obviously cost is the top thing on your mind during a big buy. And it’s an important consideration. Budget can make or break a decision when it comes time to pull the trigger on your home AC system.

But cost shouldn’t be the defining factor of what makes the best AC. A more expensive unit may run less efficiently or have less power than a low-cost unit from another brand. Different systems will have a different value to you as a consumer, and that should be factored into cost. Whichever seems like the most valuable unit within your budget is usually the one to pick. Value should account for everything ranging from power to efficiency to features.

Many of the brands in this list will have very similar units and sometimes the prices can vary a lot. If it’s not 100% obvious why one company’s unit is $1,000 more than another’s, then it’s probably not valuable to choose that unit!

savings are essential


Wading through features can either be a dream or a nightmare. Some companies have gone the smart-house route that gives you greater control at the thermostat. Others have kept things bare-bones.

Certain features can be very useful, and some are only for flash. If unnecessary features are driving up the price of a unit, a company may have cheaper models that will match your needs at a lower price.

Some pretty common features to look for are:

  • “Smart” thermostats with lots of controls. These may have different pre-sets, time-of-day temperature changes, phone controls, zoned temperatures etc.

  • Filter indicator lights which let you know when it’s time to change the air filter.

  • Fan-only switches that allow you to use the AC as a fan on cooler days.

  • Quieter operations (which we’ll talk a bit more about).

  • Variable speeds that allow you to control demand on the system.

There are other tons of features out there ranging from over-the-top to downright practical. It’s good to be aware of what your options may be.

digital themostats are a great option for new or upgraded HVAC systems

It’s also worth noting that some features, may be optional or available as upgrades. If it’s something you feel strongly about, talk to a representative at the company and see if a feature can be added or switched out.

Every brand and every model is going to have a different scope of features. If nothing seems to be “ticking all the boxes,” shop around a bit more and the right one may still turn up.

Noise Levels

I’m sure you’ve been in that apartment or office building where on a hot day you’re talking to someone and suddenly can’t hear a word they’re saying. So, you look out the window to see if someone’s parking their jet in the yard or if a helicopter is circling overhead. But then the cool air hits you and you realize it’s just the AC kicking on.

air conditioner noise can keep you up

Nobody wants that in their home! It’s an easy thing to forget about when you’re talking about a theoretical AC system. You get caught up on how well it will work and never once think of what it will be like once it’s actually running in your house. It can be a sad realization if you turn it on for the first time and your TV can’t compete with the noise.

Most units should give dB ratings, so remember to look out for those. A quiet AC will usually run around 50-65dB. That’s roughly the range between the sound of rainfall and of ambient conversation in an office.

System Size

The first step in narrowing down which AC system you need is determining what size system will work for your house. It’s important to know that this does not just come down to the square footage of your house. This is a pretty common misconception. Following conventions on this can lead to purchasing a system that’s much larger than you need. In addition to spending too much, you may end up with unstable temperatures and drafty vents from an oversize system. It can also damage the long-term lifetime of your system as it won’t be running properly.

The best thing to do is to have an HVAC tech come and do a formal assessment of your property. They’ll take into account factors like the number of windows in your home, the average occupancy, wall thickness, insulation, thermal envelope, etc. This will help you determine what size system will work best for you.

An HVAC tech will also be able to tell you if an option other than central AC, like a split ductless system, may be better for your property.

A Look at the Major Players

Now it’s time to get to know some of the top brands in the market. I’ll try to break down a little bit of information about some of the most common brands. We’ll also link to more in-depth articles.

But for now we’ll give you an overview of the company’s history and some of its offerings. The main things to know at this stage will be general impressions and which companies are divisions of a larger corporation. So let’s dive in and meet some of the biggest names in the HVAC industry!

Tips for Keeping Your Central Air Working Well

Once you get your AC installed, you want to keep it running like the day you got it for as long as possible. To keep your AC working efficiently consider these:

Get an Extended Warranty

Okay maybe this isn’t the best way to keep it running. But it’s an important backup, and a good way to stay on top of repairs.

Make a Maintenance Plan

Your AC is a sensitive piece of equipment. You should set up a regular maintenance plan with the contractor you hire to install your AC. A maintenance plan should include cleaning, inspections, seasonal turnover, upkeep, and repairs. Ideally this should happen twice a year (during spring and fall is a good time), but even once a year is a great start.

Seasonal Turn-over

Remember to properly shut down and prepare your AC for winter months. And make sure it’s working well when you start it again in the spring or summer.

Keep It Clear

Keep the area around your outdoor unit clear of bushes, branches, leaves, and debris that may damage it.

Replace the Air Filter

It’s easy to forget about your air filter because it’s out of sight, out of mind. But it should be replaced every 6-12 months at the very least, or else you may get bad airflow and damage the AC. Replacements might need to be more often if you have shedding pets or a large family, or happen to live in a dusty area. It can also vary depending on the type of filter you’re using.

Clean Ducts and Vents

This is something that would be part of your maintenance plan. But, if you don’t have a professional checking out your AC you should still be making sure your ducts and vents are free of dirt and debris.

Keep up on repairs – Kind of a no-brainer, but it bears being said: If something is wrong… get it fixed! As soon as possible! Don’t keep putting off that weird clicking noise or scraping sound. The longer you wait the more damage it may be doing.


We hope you have a better sense of what companies are out there and what they may have to offer you. You’ve seen a bit more info about what to expect and look for in a new AC company, and now know some companies to look into.

This is just an introductory article, but it should help step down that road towards a big investment. Be sure to check out our articles on individual brands for a more in-depth look at their offerings and quality.


Ruud bryant vs

Bryant vs Ruud AC prices, pros and cons

  • Do you like this article?

Quality Services

Where do you need services?

What service do you need?

Which service are you interested in?

Get up to 3 estimates for FREE!

Provide your contact information to compare estimates from top professionals in your area
By submitting my information, I agree to the Terms of Use and Privacy Policy and authorize Buyerlink and home improvement companies, including Improvenet, CraftJack, HomeAdvisor, their contractors, partners and affiliates to contact me with offers about their products or services by telephone calls, emails, artificial voice, and pre-recorded/text messages, using an automated telephone technology, to the number and email I provided above, even if my number is a mobile number or is currently listed on any state, federal or corporate Do Not Call list. I understand that my consent here is not a condition of purchase. Message and data rates may apply.

Enter Project Details (Required)

Please complete this last step to receive your contractor estimates

Got It! We'll get you connected with a local pro ASAP.

Thank you for allowing QualitySmith to assist you. Come back and see us again soon!

Choosing between Bryant vs. Ruud ACs involves considering air conditioner prices, quality, energy efficiency and the types of warranties offered.

Get free quotes on Bryant vs Ruud ACs today!

About Bryant and Ruud

Bryant vs Ruud ACsBryant was founded in 1904 and is now a division of the Carrier Corporation, which is owned by United Technologies.

Ruud heating, ventilation and air-conditioning (HVAC) equipment was introduced to the Ruud product line in the 1950s. Ruud is part of the Rheem Manufacturing Company.

Energy efficiency

If your air conditioner was made before 2006, you could save money in the long run if you install a new air conditioner. Air conditioners have seasonal energy-efficiency ratio (SEER) ratings, which are a measurement of how efficiently an AC unit cools an area during the course of a season. Since 2006, the minimum SEER rating allowed is 13, but SEER ratings can range up to 25.

Bryant air conditioners

In considering Bryant vs. Ruud ACs, the list of pros and cons for Bryant ACs is as follows:


    • SEER ratings ranging from 16.5 to 20.
    • Uses DuraGuard to protect AC units from weather elements.
    • Offers a compact model for apartments or for installations in small areas, such as balconies.
    • Offers a variety of models to accommodate different budgets.
    • Financing available.
    • A 10-year limited warranty for standard parts.
    • Optional labor warranties.


    • No models under 16.5 SEER.
    • No Comfort Control System, which would cut costs by making repairs easier.
    • No SEER above 20.

Rudd air conditioners

Ruud ACWhen making a choice between Bryant vs. Ruud ACs, the pros and cons of Ruud include:


    • SEERS ranging from 16 to 19.5.
    • Offers a variety of models to accommodate different budgets.
    • Cabinet and design offer durability and allow for easy repairs.
    • Low-profile units are less noticeable in your yard.
    • Some units use a Comfort Control System, Comfort Control2 System or Comfort Alert, which cuts maintenance and repair costs.
    • Offers a model that can be wired with noncommunicating Ruud Ultra air handlers or furnaces, in case you want to keep your old thermostat.
    • A 10-year conditional limited parts and compressor warranty for basic models.
    • A 10-year conditional unit replacement warranty and 10-year parts warranty for top-line models.


    • No models under 16 SEER.
    • No SEER above 19.5.


According to Energy Star, the lifetime cost to operate a Ruud AC is slightly less than to operate a comparable Bryant AC. Neither brand offers AC units with SEER ratings under 16.

If you live in a climate where you don't run your air conditioner heavily, a lower SEER might suffice and the unit could be cheaper. A SEER ranging from 13 to 16 is considered the low end of the SEER scale for such conditions.

If you opt for the labor warranty offered by Bryant, maintenance and repair costs might be on par with Ruud's Comfort Control System.

Comparing Bryant vs. Ruud ACs shows an almost even match. Once you've researched your options, you'll need to get an estimate before you hire a contractor to install the air conditioner.

Get your 4 free cooling estimates!

Cameron Norrie vs Casper Ruud For The Title - San Diego 2021 Final Highlights

Some gas furnaces aren’t worth the money you pay for them. Why?

They’re cheaply made, of course, and probably won’t last 12+ years, even with consistent maintenance and likely repairs.

All Brands Make Cheap Furnaces

What? A cheap Lennox furnace? Definitely. Most Lennox furnaces have a 5-year parts warranty.  

That’s the warranty length manufacturers slap on furnaces that they don’t expect to run very long without needing repairs – repairs they don’t want to pay for!

A cheap Trane furnace? Yes. But the company motto is, “It’s hard to stop a Trane!” Well, Trane makes a few cheap furnaces.

There are some exceptions to the rule. Carrier and identical-brand Bryant are an example. All the gas furnaces made by these brands are backed by a 10-year general parts warranty. Even the entry-level models are at least average in quality. Rheem/Ruud, Armstrong Air and the ICP brands (Heil, etc.) are other examples of brands that choose not to make cheap, entry-level furnaces.

Why You Should Avoid Cheap Furnaces

Here are 6 reasons to avoid inferior furnaces.

1. They use cheap components, and will likely require costly repairs in the first 10 years.

2. Budget furnaces must be cleaned and tuned every few years, or they will run inefficiently and be more likely to break down. Even good furnaces should be maintained, but it is absolutely essential for inferior models.

3. They have short warranties. The manufacturer knows how good (bad?) they are, so will only back them with a 5-year general parts warranty.

4. Entry-level furnaces are bad at indoor climate control. They all have single-stage burners and single-speed fans. Here’s how that produces poor heating comfort.

  • The fan comes on full speed before the furnace is fully hot. If you’re anywhere near a heat grate, you’ll feel cool air blowing your way. That’s not what you want on a cold January morning.
  • The burner fires 100%, its only option. It will still be roaring hot when the thermostat setting is reached and the burner shuts off. All that hot air still in the furnace has to be blown out, so it is common that the temperature in your home gets pushed a degree or two beyond the thermostat setting. In short, cheap furnaces create temperature fluctuations. This is especially true when they are coupled with cheap thermostats. Swings of 2-3 degrees are common.
  • The blower fan is still going full speed, so you’ll get cool air from the grates at the end of the cycle too.
  •  Finally, a full-speed fan is loud.

5. Discerning home buyers will spot a cheap furnace and realize they are going to have to sink another $3,500 to $7,500 into a new one in the near future. That can be a deal breaker for house shoppers looking at homes at the top of their budget range.

6. For conscientious homeowners, putting a “junk” furnace in a home they are about to sell is an ethical dilemma. Cheap flooring, cheap lighting and cheap countertops are all easily picked up by home shoppers, so there’s no “hiding” them. But a cheap furnace with a Rheem or Heil nameplate on it won’t be recognized as inferior by many house buyers. Is that fair?  To be sure, “Buyer beware.” But the point is worth considering.

Furnace Brand Quality Tiers

All the large furnace manufacturers make three grades of furnace. We call it Basic, Better and Best.

You’re probably familiar with this approach because it is done in almost every product category from carpet to cars to cardigan sweaters.

It’s the “Basic” tier that we recommend avoiding.

We’ll get to them shortly, but here are the three quality tiers, starting with Best, with a description of what you get.

Best Gas Furnaces

Top-quality parts go into these furnaces. Here’s what they deliver:

Longevity: 18-25 years. Yes, regular maintenance is important for maximum durability. And you’ll probably have to make $500 to $1,000 in repairs over its life. But the lifetime value of a premium furnace is excellent.

Performance:Your options are two-stage and variable capacity gas furnaces. Two-stage models run at 65% of capacity most of the time, only kicking into full-capacity when you boost the heat setting on the thermostat or outside temps drop rapidly and the house cools off.

Modulating, or variable capacity, gas furnaces run anywhere from 40% to 100% of capacity (the range is slightly different for a few brands). They only run as hot as needed to perfectly balance indoor temperatures. Climate control is premium.

Both types have variable-speed fans that only run as fast as needed to clear the heat properly. This means they are quieter. And you don’t get chilly blasts at the start and end of a cycle.

FWIW, we recommend two-stage furnaces. Our research shows that they are the best value for the money because they cost less, still do a great job of climate control, and if a repair is needed, it might cost less than repairs to a variable capacity furnace.

Warranties: Lifetime heat exchanger warranty and a parts warranty of 10 or 12 years depending on brand. Most are 10 years.

Many have furnace replacement warranties that provide an entirely new furnace if the heat exchanger fails. The replacement warranties range from 5 years to Lifetime. Ten years is most common, with Heil, Day & Night and Goodman as a few examples. Rheem and Ruud offer a Lifetime furnace replacement warranty on their top models.

Cost: $4,000 to $8,000 installed, depending on the furnace size, brand and installation factors.

Examples: Carrier Infinity, Bryant Evolution, Trane S9, American Standard Platinum, Goodman/Daikin GMVM, Day & Night Ion / Heil Ion, Rheem Prestige and Ruud Ultra, Maytag M1200 and York Affinity.

For more top brands and complete information about these furnaces, see our Best Furnace Brands Reviews. 

Better Gas Furnaces

These are mid-grade furnaces.

If you want an affordable furnace that will still give you good durability, this is the tier to consider.

Longevity: 17-22 years with maintenance. You might also spend $750 to $1,200 in repairs over that time, especially in the second decade.

Performance: Most of these are two-stage furnaces with variable speed or multi-speed fans for indoor comfort. A few are single-stage models with multispeed fans.

Warranties: Most have Lifetime heat exchanger warranties and 10-year parts warranties. Some of the ICP brands (Heil, Day & Night, Tempstar and others) give 5-year furnace replacement warranties on the heat exchanger.

Cost: $2,800 - $6,500 based on size, brand and installation factors.

Examples: Carrier Performance, Bryant Preferred, Rheem Classic Plus, Heil QuietComfort Deluxe and American Standard Gold and others. All top brands make mid-level furnace lines.

Basic Gas Furnaces

Call them cheap, entry-level, builder grade, etc.

These are the ones to avoid if you want a furnace with good performance and durability.

Longevity: 10-18 years with consistent maintenance. You’ll likely have to start spending money on them for repairs

Performance: All are single-stage furnaces. Most have single-speed fans, though a few have multispeed fans that offer a slight increase in climate comfort.

Warranties: 5-year parts warranties are the most common. Heat exchanger warranties are typically 20 years, not Lifetime.

Cost: $1,800 to $4,750 depending on size, brand and installation factors.

Examples: Since these entry-level brands and series are the subject of this article, here is a more complete list. 

Worst Furnace Brands to Avoid

In some cases, it isn’t the entire brand – but certain models.

Aire-Flo: This is a Lennox brand of cheap furnaces. We don’t recommend them.

American Standard:Avoid the 80% furnaces that don’t have a Platinum, Gold or Silver designation. There’s a few of them, and they’re not worth considering.

Ducane: This is a Lennox brand with decent quality and warranties. However, we have concerns about Ducane/Lennox parts availability and cost. For this reason, we recommend that you avoid Ducane furnaces.

Lennox:Avoid Lennox Elite and Merit furnaces. The Elite and Merit Series come with just a 5-year parts warranty. Sure, you can pay for an extended warranty that gives you 10 years – but extended warranties are a bad deal for the consumer. Good furnaces are backed by a 10-year parts warranty you don’t have to pay extra to get.

Trane: All furnaces have a 10-year parts warranty. The heat exchanger warranty is 20 years or Lifetime depending on the model. However, we’re not sold on the XR and XT furnaces and recommend you consider a better Trane or different brand furnace.

All the Rest

Not all brands make cheap stuff. Even if, like Carrier, they make three tiers, the lowest tier is pretty good. It couldn’t be called “junk.”

Just so you don’t think we overlooked any brands, here are the rest with a summary of their quality and warranties.

AirEase and Armstrong Air: All furnaces have a warranty of 10 years on parts and Lifetime on heat exchangers. There are no furnaces to definitely avoid.

Amana, Daikin and Goodman: These are mostly identical furnace brands and have some of the best warranties in the industry. All furnaces have 10-year parts and Lifetime heat exchanger warranties. These are solid brands – no cheap furnaces.

American Standard: Platinum, Gold and Silver – No problem. 10-year parts and Lifetime or 20-year heat exchanger warranties.

Arcoaire, Comfortmaker, Day & Night, Heil, Keeprite and Tempstar: These are identical International Comfort Products brands. Each has an entry-level series with a 20-year heat exchanger and 10-year parts warranty. The quality is average, not cheap. These are decent “budget” furnaces for homes in mild climates where a workhorse furnace isn’t necessary.

Bryant & Carrier: All Bryant models are built with quality components and backed by good warranties.

Lennox: The Dave Lennox Signature Collection furnaces have a solid warranty. You might consider avoiding them for other reasons discussed in our Best Furnace Brands Guide. We ranked Lennox at the bottom of all major brands.

Maytag, Broan, Frigidaire and Nu-Tone: These identical Nortek Global brands have very solid warranties throughout the product lineups. There are no cheap models here.

Payne: This is a United Technologies Corporation brand. UTC is the parent company of Carrier/Bryant. Payne furnaces have many of the same components as Carrier models. They are backed by 10-year parts and 20-year heat exchanger warranties. Not bad.  

Rheem and Ruud: Solid quality and warranties throughout the product lineup.

York, Luxaire, Coleman: Lifetime heat exchanger and 10-year parts warranties cover all models.

What About Furnaces Bought Online?

That’s an important question to consider.

There are a bunch of places online to buy furnaces.

Most of what you find are off-brands not worth considering.

Some online brands are budget brands owned by major furnace manufacturers. For example:

  • Ingersoll Rand, parent company of American Standard and Trane, makes Ameristar furnaces.
  • Goodman makes Direct Comfort, low-cost cheap furnaces we don’t recommend.
  • International Comfort Products (Heil, etc., and a UTC company) makes AirQuest, which are actually pretty good and have a good warranty.
  • EcoTemp is a random brand that makes cheap furnaces with OK warranties.
  • MrCool is best known for making ductless mini split heat pumps. It also makes a line of cheap gas furnaces.

Here’s the catch!

All furnace manufacturers void the warranty of a furnace bought online. Here is actual wording from warranties:

ICP / AirQuest: “This warranty does not cover…any product purchased on the internet.”

Goodman / Direct Comfort: “This warranty does not apply to: Units that are ordered over the Internet…”

Ingersoll-Rand / Ameristar: “Exclusions… Products purchased direct including, but not limited to, Internet or auction purchases and purchases made on an uninstalled basis.”

You get the point.

We don’t blame them for voiding warranties on internet sales. The manufacturers have no control over who installs them or the quality of the installation.

What we think is shady is selling these furnaces online in the first place. If you’re a homeowner with your “eyes wide open,” and you are willing to get a cheap furnace with no warranty, then that’s your call.

But our guess is that mfurnace replacementany unsuspecting customers find out the hard way that the furnace has no warranty. They either buy it and:

  • Can’t find any certified installer to install it – most won’t touch a furnace bought online.
  • They install it DIY, it breaks down because it is cheap or because they didn’t know what they were doing. They make a warranty claim, and it is immediately denied.

It isn’t worth it!

Avoid Cheap Installation Too!

There is something almost as bad as a cheap furnace brand – and that’s cheap installation.

The most important day of a furnace’s life is the day it is installed. When properly installed, it has the chance to run as efficiently and as durably as possible.

Fail in the installation process, and the furnace will run below its rated efficiency and/or will break down before it should. There’s an industry-wide understanding that furnace installation is just as important as brand.

Here’s how you can avoid cheap installation:

1. Read the PickHVAC Gas Furnace Buying Guide and many Brand Reviews (Carrier, Trane, Goodman, Lennox, Heil, Rheem/Ruud and all other major brands) to learn more about buying a furnace and the brands you’re considering.

2. Get installation estimates from at least 3 local furnace dealers.You can also use our Free Local Quotes to get 3 estimates from qualified and pre-screened furnace contractors who service your area.

3. Ask if the installers are factory trained or at least certified by NATE – the North American Technician Excellence program.

4. Check online ratings and reviews for the furnace company you’re considering.

5. Reject estimates that are much cheaper than the others. Value is good. Cheap estimates usually mean the installers are new and therefore inexperienced, they plan to cut corners or they have a bad reputation and can’t get much work. These are all things to avoid, avoid, avoid.

6. Choose an experienced installer with a good reputation that you believe, based on the estimates, is giving you a fair price.

These tips will help ensure you have a quality furnace installed without overpaying for it. Consider the performance and efficiency that is right for your climate and budget. Our Furnace Buying Guide includes information that will help you decide. It’s a great place to further your research into the right furnace for your purpose.

If this Buying Guide has been helpful to you, please share it with others!


Similar news:

Bryant vs Rheem. On consumer reports, the Bryant rates 8% (fewer repairs) compared to Rheem at 10%, plus the Bryant efficiency is better for the furnace.

Click to see full answer

Likewise, people ask, is Bryant a good brand?

When looking for a central air conditioner that is reliable, efficient and silent, Bryant is one brand that is usually recommended. This is because of its promise to give extremely reliable units along with a complimenting warranty period.

Also, what is the most reliable air conditioner brand? Here's a quick roundup of our top 10 best AC brands on the market today:

  • Goodman Central Air Conditioners.
  • Trane Central AC Units.
  • Rheem Air Conditioners.
  • Lennox HVAC Units.
  • York AC Units.
  • Ruud Central Air Conditioners.
  • Amana HVAC Systems.
  • HEIL Air Conditioners.

One may also ask, is Rheem a reliable brand?

Rheem Heating and Air ConditioningRheem's equipment does work, and it is typically reliable, as are all major brands.

What is the most reliable furnace brand?

Here's a quick roundup of some of the best furnace brands on the market today:

  • American Standard Furnaces. American Standard furnaces units are one of the most reliable brands in the business.
  • Amana Gas Furnace Units.
  • Bryant Furnaces.
  • Carrier Furnaces.
  • Daikin Furnaces.
  • Goodman Gas Furnaces.
  • Lennox Furnaces.
  • Rheem Furnaces.

11110 11111 11112 11113 11114