Streamlabs tutorial 2020

Streamlabs tutorial 2020 DEFAULT

How to Live Stream on YouTube with Streamlabs OBS - Beginner's Setup Guide

Going live on YouTube these days isn't as complicated as you would think. In this post, we'll discuss a few different things you need to know to make your live stream as professional as possible including:

  • The hardware needed to live stream
  • The software/encoders you need to live stream
  • How to set up your live stream broadcast on YouTube

I’m a gamer so I like to give things a gaming focus, so I am going to be using video game live streaming as an example. But all of the following advice will apply to any type of YouTube channel looking to learn how to broadcast live.

How to Live Stream on YouTube: The Hardware You’ll Need

Streaming these days is a lot easier when it comes to the hardware you're going to need. I'll show you what I use to stream from my own computer when I play games, and hopefully, that will give you a good baseline for a guide.

First off, let’s talk about the Internet. This is going to be the biggest bottleneck you're going to face while live streaming. The Internet is such an important element in the mix because, in some areas of the world, you just can't control what kind of speed you're going to get when you sign up for your Internet plan.

The best speed I can recommend is no less than five megabits per second upload when you're trying to stream on YouTube. Personally, I have 10 megabits per second for my upload speed, and it allows me to push a better quality live stream. 5 is just my personal recommendation because I think any less, and you're going to struggle when it comes to quality.

Now for the type of computer you need to play a game, and live stream it at the same time, I have a GTX 1060, three gigabytes, with 16 gigabytes of RAM. I’m also using an older AMD Ryzen 7 processor. These items allow me to stream with 10 megabits per second upload. I can play Minecraft at 1080p with 30 frames a second, or I can play it at 720p with 60 frames a second.

If I try to push it any higher than that, the game performance and stream quality drops. The bottom line is that top-quality hardware is great, but with software advancing so much, not using the very latest state-of-the-art computer doesn't have to limit you.

Software: Encoding a Live Stream Broadcast on YouTube

When we talk about software for live streaming, we're actually talking about encoders. Anything you've used to live stream is an encoder, but I’m going to focus on Streamlabs OBS for this tutorial.

There are a lot of encoders out there, YouTube actually has a list of recommendations, some free, some not. Thanks to how powerful these encoders have become, using something like Streamlabs OBS allows you to stream a game on your computer at a much higher quality than ever before.

Before we dive in head first, I will warn you this set-up can get very technical, and I'm going to cover it very briefly, in the most basic way possible, just to get you started. All the things I'm showing you are going to depend on you at the end of the day. You need to run test streams on your own channel, and maybe even get feedback from viewers on different testing streams you try.

Let’s go through the Streamlabs OBS set up. First, you’ll need to connect to your YouTube channel by logging in - just follow all the prompts!

  • Next, go to ‘Sources’ and click ‘Add’
  • Let’s say you want to add a game capture, just click ‘game capture’, then ‘Add Source’
  • The software will now search for a game on your system to capture
  • If it has trouble doing this, click on the drop-down menu to capture a specific window
  • Adjust the screen size so it fits the window

Now let's tackle some of the more technical aspects of live streaming on Streamlabs OBS. If we visit the output section, we can choose our encoder. In the example I use in the video (above), it's set to software x264. This is going to use my CPU to do all of my encoding for me, but if you want, you can change it to NVENC or the new version of that.

This uses your graphics card to encode. Depending on what you're doing, the game you're playing, or the type of broadcast you're doing.

Personally, I prefer using NVENC when I'm streaming, so I'm going to go ahead and select that. And I'm going to do a bit rate of about 5,000 because I already know my system, and I know it can handle that. Like I said before, this is going to take testing on your part, so maybe 2,500 is a good place for you to start, and you can go from there.

Now on to the video tab. You'll notice the base canvas resolution is 1920 x 1080. I would leave it at that. In theory, I should probably raise the base canvas resolution, but that's okay. I just got my 4K monitor, and I don't feel like resizing all of the different elements that I have on my normal live stream, so I'm going to leave it at 1080.

But the output scale is what's going to directly impact your broadcast, and I'm broadcasting at 720. These days, when people watch live streams, they watch them on a variety of devices, including phones and laptops. So with this screen being a little more compact, and squashed down to 720, it is probably going to give you a higher quality live stream at little to no impact on the viewer.

If you lower that resolution, it's going to get you closer to being able to stream at 60 frames a second, which will impact everybody who's watching, regardless if it's a nice, big TV or a phone. So because I like high frame rates when I'm playing games, I'm going to leave it at 720, but if you have a super awesome computer, maybe you can try 1080 at 60 frames. That's all up to you.

The last recommended setting is under ‘Advanced’. You can scroll down and find “dynamically change bitrate when dropping frames while streaming”.

A dropped frame is basically when the stream can't keep up and starts skipping frames. You may have a nice 60 frame stream going, but now, those frames are being dropped little by little. If the software detects that, it will change your bitrate to keep up.

So this might take some of the sharpness away from the image, but the frame rate will stay high, which is what you want. To save your changes, go ahead and click ‘Done.'

Posting Your Live Stream to YouTube

Now you’re almost ready to click ‘Go Live’, but there's one more thing we need to do, and that's set it up on the YouTube end.

Setting up a live broadcast is a lot like setting up a regular video. You still need an engaging title, a great description, some keyword tags, and a powerful custom thumbnail.

Head over to the YouTube Studio, click on ‘Create’, then in the drop-down menu hit ‘Go Live.’ If you've streamed before, you're going to get a prompt that tells you that you can copy all the settings, the thumbnail, the description, etc. from a previous stream, or you can go ahead and set up a new stream.

In my example, I’ve clicked on the ‘New Stream’ option so now I'm going to set up everything I need for the live stream, like the title and description.

You can also set your live stream to private, public, or unlisted, just like a normal video. If you want to make it private for a little while so you can tweak the description and other metadata, go ahead and do that. But if you want people to know that you're going to stream at some point, go ahead and make it public.

Now add a description, then add a title for your game, that's really important to help YouTube categorize you for that game.

Further down the Streamlabs OBS dashboard, there is an option to schedule for later. I would highly recommend doing this, as a live stream is an event, and you want people to know when it's going to happen. Scheduling for later will allow you to set the date and the time that you're going to go live, and everyone will know exactly when to come to your stream!

Next is the ability to upload your very own YouTube custom thumbnail. Having a great thumbnail is always crazy important, no matter whether it’s a video you’ve uploaded, or whether it’s a live stream. You want that thumbnail to be clickable because it’s an invitation to watch your content. If a viewer is intrigued, they will click through to your video.

Next on the dashboard is where you tell YouTube whether this live stream is ‘Made for Kids’ or not. You also have the option to impose restrictions on viewers because of their age. If you choose to restrict it to viewers that are 18 or over, YouTube users will get a notice that this live stream may not be appropriate for younger viewers.

If you’re happy with your title, description and custom thumbnail, and have completed all the details YouTube needs you to then you are ready to hit ‘Create Stream.’

Once you've created the stream, a new dashboard pops up while you're broadcasting live. It shows you all kinds of data, but what you really need to pay attention to is the information in the bottom left of the Streamlabs dashboard which is all about stream latency.

Basically, normal latency takes the broadcast and renders it for the audience. They're going to get a higher quality broadcast, but they're also going to see a higher delay based on when their chat message goes out and the time you read it. Viewers may pick up on that.

Choosing low-latency or ultra low-latency will cut down on that buffering time, but you risk your stream being lower quality.

Because you've already logged into YouTube on Streamlabs, you shouldn't need to worry about this, but if you're using a different encoder, and not Streamlabs OBS, you will need to grab the stream key and paste it into your encoder on Streamlabs. (Of course, sharing your stream key will allow people to take over your channel and stream whatever they want on it, and you don't want that!)

After you’ve finished streaming, you can come back to the Streamlabs dashboard and check out the analytics, your viewer activity, and your stream health. You can basically check all the data insights that would you after uploading any video.

Stay tuned for more expert tips on live streaming on YouTube!

Want To Get More Views on YouTube?

If you want to take your YouTube channel to the next level and get more views on YouTube then make sure to download vidIQ. Join over 1 million other users and use vidIQ to help you research YouTube, analyze videos, audit your own channel, and take actionable steps click here to install now!

And if you’re really serious about growing your YouTube views and subscribers, sign up for exclusive access to the vidIQ Academy and learn how to launch a successful YouTube Channel in just 30 days.

Sours: https://vidiq.com/blog/post/how-to-live-stream-on-youtube-setup-guide/

Streamlabs OBS Beginners Guide

Streamlabs OBS makes streaming easier than ever before. In only a few steps and with only a couple of thought-through clicks, it allows you to add themes, widgets, and other useful features such as sponsor banners, sub-goals, and live chat.

And it’s not only about improving how your Twitch stream looks and feels. More than anything else, Streamlabs is about growing your Twitch channel and viewership in a convenient way.

Here’s how to use Streamlabs OBS for streaming on Twitch.

But first,

What Is Streamlabs, Exactly?

Streamlabs is a streaming app that offers a simplified version of OBS design. Crafted with streamers in mind, this brilliant service packs a host of features aimed at improving the visual appeal of your Twitch stream and boosting viewer engagement.

It works beyond Twitch as well. You can use Streamlabs on virtually any popular streaming platform, including Mixer, Facebook Live, and YouTube. The possibilities are almost limitless.

Streamlabs OBS vs. OBS Performance Breakdown

Being more user-friendly than the original OBS and just as versatile, Streamlabs OBS ticks all the right boxes – it’s simple to use, free to download, and doesn’t require any technical knowledge. And you can learn how to use Streamlabs in a blink of an eye.

The Only Potential Problem Is…

Streamlabs OBS is currently available only for Windows. So, if you’re on MacOS or Linux, you’ll need to find the next best alternative. The good news is, there is an app version for both Android and iOS.

Setting Up Streamlabs Account

Setting up a Streamlabs account is a simple process – just go to Twitch.tv, sign up, fill out your basic information, and wait for the confirmation email. Then, download and install the app.

Get Familiar with the Dashboard

The first thing you’ll see after you install Streamlabs and sign in to your Twitch account is a bunch of settings options – the Streamlabs’ dashboard.

Use it to navigate to the “Editor” tab. You’ll spend most of your time here, as this tab serves as a centralized hub for stream configuration. It helps manage scenes, input sources, and widgets.

Choose to Go Live or to Record

Unlike the original OBS, Streamlabs allows you to choose between these two options, both of which you’ll be able to find from the “Editor” tab.

Add Widgets & Themes

Adding widgets to your Twitch stream is as easy as learning how to use Streamlabs. Everything you need to do is look, read, and click. In order to add widgets and themes you’ll need to head over to the “Add Source” tab.

You’ll see a widget menu with a couple of options to choose from. By double-clicking on the desired widget, you’ll open the settings tab with customization tools. If you’re looking for themes, you’ll find them under the “Themes” tab.

Streamlabs boasts a gallery of template themes that you can use as-is or customize at your will. This applies to widget themes as well.

And that’s pretty much everything you need to know about how to use Streamlabs OBS for Twitch. Enjoy the app’s many features and have fun streaming! If you’re looking for the best way to customize your stream, get started with Visuals By Impulse today!

Facebook Icon - ShareFacebook Icon - ShareFacebook Icon - Share
Sours: https://visualsbyimpulse.com/a-beginners-guide-to-streaming-with-streamlabs-obs/
  1. Easter lamb figurine
  2. Raghav gupta photography
  3. Clarion ledger app

Complete Streamlabs Obs Tutorial 2020 Hindi Recording Settings

Home » Complete Streamlabs Obs Tutorial 2020 Hindi Recording Settings

Author By : Artist vs Games | Posted 1 day ago

Complete Streamlabs Obs Tutorial 2020 Hindi Recording Settings Artist vs Games SONGily can be a totally free MP3 download application. It is among the finest MP3 music download applications that enables you to conserve remix and canopy song variations of authentic music. This Software helps you to preview the music. MusiXnergizer
Microsoft and DuckDuckGo have partnered to deliver a look for Alternative that provides suitable ads to you personally although defending your privateness. In case you click a Microsoft-furnished advert, you ll be redirected on the advertiser’s landing web page by means of Microsoft Advertising’s System.

Next →


Related Complete Streamlabs Obs Tutorial 2020 Hindi Recording Settings

Complete Streamlabs Obs Tutorial 2020 Hindi Recording Settings, You cant broadcast them. It is possible to sign-up your self on Jamendo Group and overview and share your thoughts on the site. You are able to usually make a donation to your preferred artist with the observe you love one of the most.

Complete Streamlabs Obs Tutorial 2020 Hindi Recording Settings, The website navigation is thoroughly clean and simple to understand, and you may get specific tracks or whole albums at the same time.You ll like Audiomack if you want SoundCloud and have an interest in finding new tunes. The many music on this website is one hundred pc lawful and free to stream, and depending on the artist, you will discover new music downloads, as well..


Popular search

Sours: https://meet-seva.btp.ac.id/complete-streamlabs-obs-tutorial-2020-hindi-recording-settings.xhtml

In front of the mirror I had the hairs above my eyebrow and tugged at them. I even distorted everything. '' Here is a masochist, I thought and immediately remembered how I accidentally pulled out a few pubic hairs from my trousers with. A lightning bolt. Then everything was forgotten again, until on TV in advertising I saw the sticky plates, with the help of which women do their legs.

Tutorial 2020 streamlabs

I shudder and on all fours, like a devoted doggie, crawl to the Divine Lodge. I have to serve my mom first. Morning Cooney is a charge of vivacity for the whole day, cleaner than banal coffee. But in order to get to the cave sparkling with lust, I still need to process every inch of HER velvet body.

Complete Streamlabs OBS Tutorial For Beginners 2021 (Start-To-Finish)

"Well. at the first examination, no violations were found" I regretfully pulled out my finger, parted the labia, and ran my finger in the lubricant along the clitoris several times. "Is the sensitivity saved?" "Yes. " "Well. everything is great, your vagina is in good shape" "In good shape?" "In a magnificent, even one finger palpation is hardly possible" "Do you think two would not fit?".

Now discussing:

Eugene, and my friend from childhood and stormy youth, as you guessed it, is Georgy, practically the Victorious. We are very worried about your health - it is very dangerous to dine in the student canteen, so we suggest you visit the nearby. Restaurant "Bukhara".



1156 1157 1158 1159 1160