Predator engine carburetor

Predator engine carburetor DEFAULT

Predator 212 backfiring out carb and wont start

uhhh you left the governor in and disabled it??

that's a baaad idea.
remove it ! NOW before it detonates inside the engine and locks your running engine from 5k rpms to zero in the blink of an eye.

Really.. that thing either has to do it's job or must be romved, no inbetweens
(that's essentially a cherry bomb, you either have it unlit in your pocket, or a safe distance apart.. lit in your pocket is waiting for injury ;))

Now that that's out of the way.. the analogy comes from the 'observation'
that most users posting walls of text, like you did above;
are indeed using their phones to visit and participate;
and what looks okay on 2" wide screen and even a 4" wide screen a foot from your face,
So they tend to not think ahead but just type as they would type on whatsapp or whatever.

Anyways back to topic..
that cam is still untouched.. so valve timing can not be the issue,
the flywheel and it's key were fine, and I'd bet you checked the magneto's air gap as well already.

I doubt it's really possible to overheat the magneto itself to have it missfiring,
so you have a sticky valve for some reason..
valve lash might be an option, but an unlikely one..
a bent valve stem or a contaminated port is more likely to prevent it sealing up.
Since even on zero lash, the intake port would be fully closed when the spark ignites.
at least when trying to start.

Oh... wait a minute....

Here's an idea (maybe far fetched, but hear me out)
what if that governor already decided to desintegrate inside your engine,
and instead of spittings it's bits and bobs
into the cog gears of your crank and cam to lock the engine up,
it decided to spit one part unter the lifter with the oil acting to glue it under it
to essentially add a bit of lift to the intake valve at all times..
taking up all slack and even cracking the valve seal open at least most of the time.

Since that governor has to go anyways.. that'd be the very first thing I'd check atm;
to be sure by no means of firing the engine up the next time (or trying to that is)
I'd cause a much bigger issue.
cleaned and checked internals with a properly reset (just to be sure) valve lash
would certainly rule out all internal issues within less than 45mins of work.

And since that governor -again- has to go anyways, even if everything is in perfect order internally, that time wouldn't be wasted at all,
and we could concentrate on the 'externals' then.

Running an engine too lean means overheating and depending on how lean an engine runs,
it could also cause the spark plug to overheat of course,
and once that's hot enough it can certainly ignite incoming fuel/air mix already..
unlikely during pulling the rope of course,
and that also should be dealt with with the choke setting to at least have it trying to fire up
and then dying out after just a few minutes acting that way.

BUT check your spark plug insulation colour to dial in the fuel mix anyways..
a too lean engine is worse than a too rich one (you rather foul a plug than having the plug drop ceramic shards into the cylinder when it cracks from heat)
that can only be done properly with a running engine though..
so that'd be part two in my book ;)

'sid

 

Sours: https://www.diygokarts.com/community/threads/predator-212-backfiring-out-carb-and-wont-start.44228/

212CC Carburetor Compatible with Harbor Freight Predator 212 CC 60363 68121 68120 69730 69727 and Honda GX160 5.5 HP GX200 6.5 HP Engine

Stens 520-718. 。 212cc Carburetor Replaces # 16100-Z0L-023. 1 Fuel Line, 16100-ZM0-804 16100-ZM0-023 16100-ZM0-802 16100-Z0L-013 16100-Z0L-003 16100-ZM0-803. 。 Package include: 1x Carburetor kit as pictured: 1 Carburetor. 1 Choke Lever, 1 Choke Lever, 16100-ZM0-804 16100-ZM0-023 16100-ZM0-802 16100-Z0L-013 16100-Z0L-003 16100-ZM0-803.。 Package include: 1x Carburetor kit as pictured: 1 Carburetor. 3 Gasket.。 。 。 。, 1 Fuel Line, Buy 212CC Carburetor Compatible with Harbor Freight Predator 212 CC 60363 68121 68120 69730 69727 and Honda GX160 5.5 HP GX200 6.5 HP Engine: Carburetors - ✓ FREE DELIVERY possible on eligible purchases. 212cc Carburetor fits Harbor Freight Predator 60363 68121 68120 69727 69730 6.5HP/7HP Engine (RATO R210-III) . 。 212cc Carburetor for Honda GX140 GX160 GX168 GX200 5HP 5.5HP 6.5HP engine. 。 212cc Carburetor Replaces Honda # 16100-ZH8-W51 16100-ZH8-W61 16100-ZE1-814 16100-ZE1-825, Stens 520-718.。 212cc Carburetor Replaces # 16100-Z0L-023, 3 Gasket. 。 212cc Carburetor fits  Harbor Freight Predator 60363 68121 68120 69727 69730 6.5HP/7HP Engine (RATO R210-III)  .。 212cc Carburetor for Honda GX140 GX160 GX168 GX200 5HP 5.5HP 6.5HP engine.。 212cc Carburetor Replaces Honda # 16100-ZH8-W51 16100-ZH8-W61 16100-ZE1-814 16100-ZE1-825.









Usamos cookies para asegurar que te damos la mejor experiencia en nuestra web. Si continúas usando este sitio, asumiremos que estás de acuerdo con ello.Aceptar

212CC Carburetor Compatible with Harbor Freight Predator 212 CC 60363 68121 68120 69730 69727 and Honda GX160 5.5 HP GX200 6.5 HP Engine

Honda GX160 5.5 HP GX200 6.5 HP Engine 212CC Carburetor Compatible with Harbor Freight Predator 212 CC 60363 68121 68120 69730 69727 and, 5 HP GX200 6,5 HP Engine: Carburetors - ✓ FREE DELIVERY possible on eligible purchases,Buy 212CC Carburetor Compatible with Harbor Freight Predator 212 CC 60363 68121 68120 69730 69727 and Honda GX160 5,Low price & fast shipping,Get Great Savings,Discounted price,Shop now for fast and free shipping. 69727 and Honda GX160 5.5 HP GX200 6.5 HP Engine 212CC Carburetor Compatible with Harbor Freight Predator 212 CC 60363 68121 68120 69730, 212CC Carburetor Compatible with Harbor Freight Predator 212 CC 60363 68121 68120 69730 69727 and Honda GX160 5.5 HP GX200 6.5 HP Engine.

Sours: http://360gradosevents.es/Freight-Predator-CC-/Carburetors-bhoznb-569421.htm
  1. Reeper utv price
  2. Pca salary massachusetts
  3. Freedom constrained liner

Carburetor with 24 mm Air Intake for the Predator 212cc 6.5 HP Engine

Description

Our carburetor with 24 mm air intake for the Predator 212cc 6.5 hp engine is a high-performance manual choke carburetor that is a perfect replacement carb for many applications. This carburetor is also used on many power generators, pressure sprayers and other portable equipment using 163cc and 196cc Honda-clone utility engines. Check your product and the image for compatibility.

Because a carburetor works best when the air that flows into it is clean, we offer this fine carb with an optional standard air filter, or with a high performance air filter to keep the dust and crud out, or without any optional filter at all. Whether you only need the carb or if you prefer one of the carb & filter combinations, we are sure that our easily-installed carburetor with 24 mm air intake will enhance your engine's performance. This carburetor is compatible with 196cc, 200cc, and 212cc mini bike, pit bike, and go-kart engines, and is equipped with a manual choke, and a fuel shut off valve.

The carburetor has a water trap feature that prevents water condensation from getting into your carb and freezing overnight. The trap is the small reservoir directly under the fuel cut-off switch, and it allows the carb to be periodically cleaned of water, ice, and other carb-clogging gunk.

If cold weather running isn't an issue, you may want our 6.5 Hp GX200 Carburetor. It's the same carburetor, just without the auxiliary water trap.

High Performance Filter Note: The optional high performance filter assembly includes a stack. This is the large machined alloy ring with a beveled inside diameter that fits into the rubber base of the filter. When mounting this filter assembly, always make sure that the wider end of the hole is inside of the filter and the smaller or narrower end of the hole is on the carburetor side. When properly mounted, the stack functions as a venturi, smoothing the air flow into the carburetor and likewise smoothing the engine's running.

We recommend replacement of the carburetor gasket when replacing the carburetor, as it is easily ripped and torn when removing the old carburetor. The gasket can be found at the link below:

Carburetor Gasket & Insulator with 24 mm Air Intake for 163cc 5.5 Hp & 196cc 6.5 Hp Engines

Specifications

Engine Intake Inner Diameter: 19 mm
Air Intake Inner Diameter: 24 mm
Overall Depth: 5.4 cm
Overall Width: 8 cm
Overall Height: 10.5 cm
Center to Center Mounting Hole Distance: 43 mm
Mounting Holes Diameter: 6 mm
Choke: ManualFuel Line Length: 16 cm +/-
Fuel Line Inner Diameter: 5 mm
Fuel Line Outer Diameter: 8 mm
Drain: No
Fuel Shutoff: Yes

Standard Filter:
Length: 100 mm
Width: 75 mm
Height: 70 mm

High Performance Filter:
Overall Diameter at Widest Point: 95 mm
Overall Diameter at Top: 85 mm
Rubber Intake Inner Diameter: 60 mm
Rubber Intake Outer Diameter: 74 mm
Overall Height: 160 mm

Sours: https://www.monsterscooterparts.com/carburetor-24mm-intake-predator-212cc-engine.html

Carburetor Spare Parts For Predator Gas Engine Generator

GX270Piston(With Ring,Pin,Clip)0.75SetsGX270Piston(With Ring,Pin,Clip)1SetsGX390Piston(With Ring,Pin,Clip)STDSetsGX390Piston(With Ring,Pin,Clip)0.25SetsGX390Piston(With Ring,Pin,Clip)0.5SetsGX390Piston(With Ring,Pin,Clip)0.75SetsGX390Piston(With Ring,Pin,Clip)1Sets154Piston(With Ring,Pin,Clip)1Sets154Piston(With Ring,Pin,Clip)0.75Sets154Piston(With Ring,Pin,Clip)0.5Sets154Piston(With Ring,Pin,Clip)0.25Sets154Piston(With Ring,Pin,Clip)STDSets152Piston(With Ring,Pin,Clip)STDSets152Piston(With Ring,Pin,Clip)0.25Sets152Piston(With Ring,Pin,Clip)0.5Sets152Piston(With Ring,Pin,Clip)0.75Sets152Piston(With Ring,Pin,Clip)1SetsGX240Piston(With Ring,Pin,Clip)0.25SetsGX240Piston(With Ring,Pin,Clip)0.5SetsGX240Piston(With Ring,Pin,Clip)STDSetsGX200Piston(With Ring,Pin,Clip)STDSetsGX200Piston(With Ring,Pin,Clip)0.25SetsGX200Piston(With Ring,Pin,Clip)0.5SetsEC10Piston(With Ring,Pin,Clip)0.5SetsEC10Piston(With Ring,Pin,Clip)0.25SetsEC10Piston(With Ring,Pin,Clip)STDSetsEY28Piston(With Ring,Pin,Clip)0.25SetsEY28Piston(With Ring,Pin,Clip)0.5Sets186FPiston(With Ring,Pin,Clip)STDSets186FPiston(With Ring,Pin,Clip)0.25Sets186FPiston(With Ring,Pin,Clip)0.5Sets186FPiston(With Ring,Pin,Clip)0.75Sets186FPiston(With Ring,Pin,Clip)1Sets178FPiston(With Ring,Pin,Clip)STDSets178FPiston(With Ring,Pin,Clip)0.25Sets178FPiston(With Ring,Pin,Clip)0.5Sets178FPiston(With Ring,Pin,Clip)0.75Sets178FPiston(With Ring,Pin,Clip)1Sets
Sours: https://spanish.alibaba.com/product-detail/carburetor-spare-parts-for-predator-gas-engine-generator-60775254795.html

Engine carburetor predator

The Predator engine by Harbor Freight has a displacement of 212cc and a maximum output of 6.5 HP. It’s one of the most popular go-kart racing engines for homemade and off-road go-karts and can also be used for other types of recreational vehicles or tools. It’s known to be affordable, lightweight and is easy to install and operate. If your kart is currently running on a Predator 212cc engine, you’re probably already having loads of fun racing it. 

A carburetor is a mechanical component on a go-kart that mixes air and fuel for the engine. The Predator 212cc doesn’t come with a carburetor and that’s something you would have to install and mount on the engine. In essence, a carburetor helps to mix a proper air–fuel ratio for your engine. They’re affordable, easy to install and can make your kart go faster if properly adjusted.

Just so you know, the Predator 212cc carburetors mentioned in this buyer’s guide are not only suitable for your go-karts, but also for any other types of vehicles, equipment and tools. Let’s take a look at some of the best carburetors for your Predator 212cc engine.

1. Topemai Carburetor for Predator 212cc Engine

Measurements

  • Center Mounting Hole: 42 mm
  • Core Hole: 19 mm
  • Choke Hole: 24 mm

The Topemai Carburetor is the best carburetor for the Predator 212cc engine, due to its high-quality components and excellent build quality. This carburetor fits the Predator engine with series numbers: 60363, 68121, 68120, 69727, and 69730. It comes in a basic set that features three gaskets, one insulator, one choke lever and one carburetor. The carburetor and its components fits nicely on the Predator engine and is very simple to install and use.

Contents of Kit:

  • 1 x Carburetor
  • 1 x Insulator
  • 3 x Gaskets
  • 1 x Choke Lever

2. FitBest Carburetor for Predator 212cc Engine

Measurements

  • Center Mounting Hole: 42 mm
  • Core Hole: 19 mm
  • Choke Hole: 24 mm

The FitBest Carburetor Kit is another great add-on to the Predator 212cc engine. It perfectly attaches to your existing Predator 212cc engine and contains four different components. In this carburetor set you’ll find one fuel line, three gaskets, one choke lever and one carburetor. All items in this carburetor kit are compatible with each other and the kit is extremely easy to assemble and install.

Contents of Kit:

  • 1 x Carburetor
  • 1 x Fuel Line
  • 3 x Gaskets
  • 1 x Choke Lever

3. Hipa Carburetor for Predator 212cc Engine

Measurements

  • Center Mounting Hole: 42 mm
  • Core Hole: 19 mm
  • Choke Hole: 24 mm

The Hipa Carburetor Kit is more of a set than anything else. The great thing about this set is that it comes with a lot of carburetor accessories that you can make use of. It contains one carburetor, one insulator, three gaskets, one on/off switch, one oil sensor, one fuel line, one fuel tank filter and one spark plug. This set is perfect if you are building your own go-kart and are looking to upgrade or install a carburetor.

Contents of Kit:

  • 1 x Carburetor
  • 1 x Oil Sensor
  • 1 x Insulator 
  • 1 x Fuel Filter
  • 1 x Spark Plug
  • 3 x Gasket
  • 1 x On/Off Switch 
  • 1 x Fuel Line

4. Buckbock Carburetor for Predator 212cc Engine

Measurements

  • Center Mounting Hole: 42 mm
  • Core Hole: 19 mm
  • Choke Hole: 24 mm

The Buckbock Carburetor is also great and fully compatible for your go-kart Predator 212cc engine. It fits series 60363, 69730 & 69727 and is extremely easy to install. It contains one carburetor, one insulator and three gaskets. Therefore, this is considered a basic set and is recommended if you’re looking for a simple carburetor kit for your go-kart. If you’re looking for a kit with more components, you could opt for the Hipa or Dalom kit instead.

Contents of Kit:

  • 1 x Carburetor
  • 1 x Insulator
  • 3 x Gaskets

5. Dalom Carburetor for Predator 212cc Engine


Measurements

  • Center Mounting Hole: 42 mm
  • Core Hole: 19 mm
  • Choke Hole: 24 mm

The Dalom Carburetor Kit is another great option if you’re looking to build a homemade go-kart. It fits perfectly on to your Predator 212cc engine and is very easy to install. It also contains a lot of other components that you can add to your go-kart. In this set you’ll find a carburetor, one spark plug, one fuel filter, one fuel line, one insulator, three gaskets and one choke lever.

Contents of Kit:

  • 1 x Choke Lever
  • 1 x Carburetor 
  • 3 x Gasket
  • 1 x Fuel Line
  • 1 x Fuel Filter
  • 1 x Insulator
  • 1 x Spark Plug

Buying Guide: How to Choose a Carburetor for a Predator 212cc Engine

In this buyer’s guide, we’ll be going through some of the most important things to look out for when buying a carburetor for your Predator 212cc engine. As you should have noticed by now, there are many carburetors on the market. Most of the carburetors for the Predator engines are similar but contain different parts. Each kit has its own benefits and the best one depends on your preference and its intended application. We’ll be taking a look at compatibility, application, components, condition and price, so that you know which one is right for you.

Compatibility

The most important criteria for selecting a carburetor for your Predator engine is compatibility. You have to make sure that the carburetor you opt for is compatible with your Predator 212cc engine. One way you can ensure that a carburetor is compatible is by looking at the product description. Most manufacturers and product pages will indicate which engine brand and model it’s compatible with. You should see “Predator 212cc engine” somewhere in the product description. 

Just the brand alone doesn’t ensure compatibility, as each model has different dimensions for the carburetor mounting. You’ll have to look out for the exact measurements of the center mounting hole (42 mm), core hole (19 mm) and the choke hole (24mm). Most of them are also cross-compatible, meaning that the carburetor can also be installed on other brands and models such as the Honda GX160, GX168F and GX200, as they share the same measurements. 

If any of these dimensions are off, that means that the carburetor is not compatible with a 212cc Predator engine. The selected carburetors in the list above have been checked and are 100% compatible.

Best Predator 212cc Engine Carburetors
  • Center Mounting Hole: 42 mm
  • Core Hole: 19 mm
  • Choke Hole: 24 mm

Image Source: NR Racing 

Application

The next thing you should think about is what kind of application this carburetor will have. In other words, you should determine if this carburetor for your Predator 212cc engine is for a tool, equipment or go-kart. The most common application for carburetors is on go-karts. 

For example, if you’re building a homemade go-kart with and plan for it to have some additional features, you may want to opt for a kit that contains some extra components. If you’re looking for a carburetor that you want to install on a racing go-kart, a basic set may be sufficient for you.

Components

Once you have established the application of your carburetor, you can now look into the different components. Carburetors come with different components depending on the kit. You’ll commonly find basic kits that contain a carburetor, three gaskets and an insulator and you’ll find more complete kits for advanced applications, for example for a homemade or custom go-kart. These kits contain all items in the basic kit, with the addition of fuel lines, choke levers, oil sensor, fuel filter, spark plug or sometimes an on/off switch. 

Most people go for a basic carburetor kit, as they are looking to get additional aftermarket items such as custom fuel lines or air and fuel filters. If you want to skip the hassle and are looking for a more complete kit, you should go for a kit that contains all the components that you’re looking for. Here’s a list outlining what components should be inside the basic kit for you to run a carburetor on your 212cc Predator engine. I’ve also included a separate list where you can see some of the additional components that are optional to have and are included in more complete kits.

Standard Components:

  • 1 x Carburetor
  • 1 x Insulator 
  • 3 x Gasket

Additional Components:

  • 1 x Oil Sensor
  • 1 x Fuel Filter
  • 1 x Spark Plug
  • 1 x On/Off Switch 
  • 1 x Fuel Line
  • 1x Choke Lever

Condition

Carburetors for a Predator 212cc engine can be purchased new or used. I highly suggest that you buy a new carburetor, as it’s affordable and you can rest assured that it’s in good condition and will therefore last for a long time. Carburetors can last for years, unless they are damaged or installed incorrectly.

Price

Prices for carburetors vary depending on the kit. Basic kits can be bought new for as little as $14 to about $20. More complete kits range from about $15 to $22. As you can see, new carburetors are relatively cheap and can do wonders for your Predator 212cc engine. 

If you’re on a shoestring budget and are looking for a cheap carburetor, you can go for a basic kit that starts at about $14 or you can opt for a used carburetor that would cost between $5 to $10. As carburetors are affordable, I would always recommend buying a brand new one as they last very long and the price difference isn’t much.

Conclusion

Carburetors are a great addition to a Predator 212cc engine. They help to regulate the air-fuel ratio and have the ability to increase your engine performance. As they are very easy to install and are very affordable, it should be quite an easy decision. Before buying a carb for your go-kart you should always consider the compatibility, application, components, condition and price of a carburetor kit. I hope that this guide has given you some value so that you can make an informed purchase decision. Happy modding!

Sours: https://www.gokartguide.com/predator-212cc-carburetor/
vm22 Mikuni carburetor tuning / vm22 / Predator 212

He and me. - did what they wanted, and let others consider it a vice and perversion, let others stigmatize such love, let others flee from it, like from the plague, we had. Nothing to do with them, these others. there was happiness. the most real happiness.

You will also like:

Free and completely at your disposal. That's how wonderful. I am going to go to the center in the evening for "festivities".



436 437 438 439 440